July 21st 2011 - Most of the current high power semiconductors are optimized for switching frequencies between 4 and 8 kHz. Today, however, more and more applications require frequencies of 10 kHz and higher. New power modules specifically designed for higher frequencies can now fill that gap.

For a powerful, reliable and cost effective motor drive, the right choice of power semiconductors is very important. Most of the current high power motor inverters use IGBTs (Insulated Gate Bipolar Transistor) for the power switching, which are built in Trench Field Stop technology. The Trench Field Stop IGBT is designed for motor drive applications with a typical switching frequency of up to 4 kHz. At higher frequencies, the Planar Cell Field Stop components are the optimal choice. This technology seems to be the favourite for nearly all 1200V motor drive applications using switching frequencies above 8 kHz.

This article provides a comparison of both technologies, Trench Field Stop and Planar Cell Field Stop Technology, and explains what is best for fast switching motor drive applications.
Please see more information about this subject under:
http://www.vincotech.com/news/articles/fast-switching-motor-drive-applications.html?campaign_id=Fast-Switching-MD

About Vincotech:
Vincotech, an independent operating unit within Mitsubishi Electric Corporation, is a market leader in power modules in development and manufacturing of high-quality electronic power components for Motion Control, and Renewable Energy applications.
With some 500 employees worldwide, backed by vast experience and a long history in electronics integration, Vincotech leverages these assets to help customers attain maximum market success.
For more information please see: www.vincotech.com

Contact:
Andreas Johannsen,
Product Marketing Manager,
Vincotech GmbH,
Email: andreas.johannsen[at]vincotech[dot]com
Tel: +49 89 878067-145

Distributed on behalf of Vincotech GmbH by NeonDrum news distribution service (http://www.neondrum.com)