|
Title: PC Diagnostics - Step by Step Post by: Daniel Franklin on October 02, 2007, 03:36:20 PM Computer diagnostics help you to identify different problems and failures that any computer may present in any given moment for an apparently unknown cause. PC diagnostics test the system, including memory and BIOS, the software and the hardware by means of PC diagnostics software designed specially to do this task.
Common problems occur when a computer has insufficient resources, either low RAM (memory) or low free disk space. These conditions may result from a temporary condition, as an example, when the system is allocating memory and disk space to create temporary files that later will be deleted by the same process, or because the high level of disk activity requires an update. PC diagnostics software can determine every stage, offering the fix or advice to solve particular problems through different processes. They usually begin with a BIOS check up, although the very first basic Computer diagnostics comes built in, making it flash the led indicator in your keyword when something goes wrong or when the monitor does not come up. Check signal error using PC diagnostics applications is also possible and advisable since the fast modern processor sometimes are forced to a quick start, skipping all the built-in diagnostic tests. In addition, some utilities are able to modify the BIOS setting to boost the start up speed of your computer. Never ever, modify the BIOS settings if you are not aware of the problems a misconfiguration may cause; otherwise make a backup of the BIOS before modifying it. Computer diagnostics may help you go through the process and continue with the routine memory testing, usually returning a report of the bytes allocated to the system resources, which are still available to use. Depending on the PC diagnostics software you are using for the testing process, you can run a full check up, that runs in batch mode with almost no intervention on your part, or you will be presented with a sort of menu with check boxes to click only the PC diagnostics you need to verify. Once you have selected the Computer diagnostics to be performed, the application will search for faults in specific software modules that usually can be solved by installing a relevant software update or “service pack” as well as for general protection failures (GPFs) that occur when the operating system cannot handle a problem in an orderly way. Insufficient resources and faults in software modules are the most common causes of GPFs reported by PC diagnostics. PC diagnostics software will continue the process verifying problems with device-drivers and configurations, as well as with those plug-and play system devices in order to provide you with an extensive report of the diagnostic process. Natalie Aranda writes on computers and information technology. Computer diagnostics help you to identify different problems and failures that any computer may present in any given moment for an apparently unknown cause. PC diagnostics test the system, including memory and BIOS, the software and the hardware by means of PC diagnostics software designed specially to do this task. PC diagnostics software can determine every stage, offering the fix or advice to solve particular problems through different processes. Article Source: http://EzineArticles.com/?expert=Natalie_Aranda |