June 30th 2011 - The increasing request for motor drives with higher power levels is also driving the demand for power modules providing higher currents.
The conventional approach to fulfil this requirement is to look for dedicated high current power modules. This article describes the alternative approach of paralleling IGBTs and diodes within one power module to extend its power capability, for example using a 35 A sixpack module as a 100 A half bridge.
The use of sixpacks as half bridges can boost the performance and enable the use of preferred modules and packages at higher power levels. Special care has to be taken regarding the drive circuit and current de-rating is to be considered when calculating the current of a single chip used in a multi-chip arrangement. Individual emitter sense down to chip level and symmetrical design are required of the power module. By using the components in parallel, not only can higher current levels be reached, but also the reliability of the design is improved.
For more information please see Vincotech’s article about this subject:
http://www.vincotech.com/news/articles/paralleling-of-igbts-in-power-modules.html?campaign_id=Paralleling-IGBTsAbout Vincotech:
Vincotech, an independent operating unit within Mitsubishi Electric Corporation, is a market leader in power modules in development and manufacturing of high-quality electronic power components for Motion Control, and Renewable Energy applications.
With some 500 employees worldwide, backed by vast experience and a long history in electronics integration, Vincotech leverages these assets to help customers attain maximum market success.
For more information please see:
www.vincotech.comMedia Contact:
Werner Obermaier,
Head of Product Marketing,
Vincotech GmbH,
E: wobermaier[at]vincotech[dot]com,
T: +49 89 878067-143
Distributed on behalf of Vincotech GmbH by NeonDrum news distribution service (
http://www.neondrum.com)
